Two-brothers-racing Polaris RZR-S Manual do Utilizador descarregar pdf (Página 3)

iTBR001-275

2008-10 Polaris RZRS - 3

Figure AFigure BFigure C

unplug

connector

unplug

connector

unplug

The ignition must be turned OFF before installation.

1 Remove both seats.

2 Remove the plastic panel behind the seats.

3 Locate the injector harness connectors as shown in Figure A.

The injector harness connectors are located next to the ignition coils.

4 Unplug the injector harness connectors.

5 Attach the Juice Box Pro connectors to the injector harness and stock wiring harness

as shown in Figure B.

6 Locate the grey 3-pin throttle position sensor (TPS) connector as shown in Figure C.

The TPS connector is located to the rear of the throttle body.

7 Unplug the TPS connector.

Note:Figure C was taken with the bed removed. This connector can be accessed

without removing the bed.

1 2 3 4 5

Sem comentários

Two-brothers-racing Polaris RZR-S Manual do Utilizador Página 3